View TSV321_7758613.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

december 2005 rev. 3 1/15 15 TSV321-tsv358-tsv324 general purpose, input/output rail-to-rail low power operational amplifiers operating at v cc = 2.5v to 6v rail-to-rail input & output extended v icm (v dd - 0.2v to v cc + 0.2v) capable of driving a 32 ? load resistor high stability: 500pf available in sot23-5 micropackage operating temperature range: -40, +125c description the tsv358 and tsv324 (dual & quad) are low voltage versions of lm358 and lm324 commodity operational amplifiers. TSV321 is the single version. the TSV321/358/324 are able to operate with voltage as low as 2.5v and features both i/o rail-to-rail. the common mode input voltage extends 200mv at 25c beyond the supply voltages while the output voltage swing is within 100mv of each rail with 600 ohm load resistor. these devices offer 1.3mhz of gain-bandwidth product and provide high output drive capability typically at 65ma- load. these performances make the tsv3xx family ideal for active filters, general purpose low-voltage applications, general purpose portable devices. applications battery-powered applications audio driver (headphone driver) sensor signal conditioning laptop/notebook computers TSV321rilt tsv358ist-tsv358id-tsv358idt-tsv358ipt tsv324id-tsv324idt-tsv324ipt 1 2 3 5 4 vdd vcc non inverting input inverting input output 1 2 3 5 4 vdd vcc non inverting input inverting input output vdd vcc 1 2 3 5 4 8 7 6 non inverting input 1 inverting input 1 output 2 + _ output 1 non inverting input 2 inverting input 2 + _ vdd vcc 1 2 3 5 4 8 7 6 non inverting input 1 inverting input 1 output 2 + _ output 1 non inverting input 2 inverting input 2 + _ vcc vdd 1 2 3 11 4 14 13 12 non inverting input 2 inverting input 2 output 4 output 2 non inverting input 4 inverting input 4 5 6 7 8 10 9 + _ + _ + _ output 3 non inverting input 3 inverting input 3 + _ output 1 non inverting input 1 inverting input 1 vcc vdd 1 2 3 11 4 14 13 12 non inverting input 2 inverting input 2 output 4 output 2 non inverting input 4 inverting input 4 5 6 7 8 10 9 + _ + _ + _ output 3 non inverting input 3 inverting input 3 + _ output 1 non inverting input 1 inverting input 1 vdd vcc 1 2 3 5 4 8 7 6 n.c. n.c. non inverting input inverting input output + _ n.c. vdd vcc 1 2 3 5 4 8 7 6 n.c. n.c. non inverting input inverting input output + _ n.c. TSV321id-TSV321idt www.st.com
order codes TSV321-tsv358-tsv324 2/15 1 order codes part number temperature range package packaging marking TSV321rilt -40c to +125c sot23-5l tape & reel k174 TSV321railt sot23-5l tape & reel k178 TSV321id/idt so-8 tube or tape & reel v321id tsv358id/idt v358id tsv358ipt tssop8 (thin shrink outline package) tape & reel v358i tsv358ist miniso-8 k175 tsv358iyd/iydt so-8 (automotive grade level) tube or tape & reel tsv358iypt tssop8 (automotive grade level) tape & reel v358y tsv324id/idt so-14 tube or tape & reel v324id tsv324ipt tssop14 (thin shrink outline package) tape & reel v324ip
TSV321-tsv358-tsv324 absolute maximum ratings 3/15 2 absolute maximum ratings table 1. key parameters and their absolute maximum ratings symbol parameter value unit v cc supply voltage (1) 1. all voltages values, except differential voltage are with respect to network terminal. 7v v id differential input voltage (2) 2. differential voltages are the non-inverting input terminal with respect to the inverting input terminal. if vid > 1v, the maximum input current must not exceed 1ma. in this case (vid > 1v) an input series resistor must be added to limit input current. 1 v v i input voltage v dd -0.3 to v cc +0.3 v t stg storage temperature -65 to +150 c t j maximum junction temperature 150 c r thja thermal resistance junction to ambient (3) sot23-5 so-8 so-14 tssop8 tssop14 miniso-8 3. short-circuits can cause excessive heating. destructive dissipation can result from simultaneous short-circuit on all amplifiers. 250 125 103 120 100 190 c/w esd hbm: human body model (4) 4. human body model, 100pf discharged through a 1.5k ? resistor into pin of device. 2kv mm: machine model (5) 5. machine model esd, a 200pf cap is charged to the specified voltage, then discharged directly into the ic with no external series resistor (internal resistor < 5 ? ), into pin to pin of device. 200 v cdm: charged device model 1.5 kv latch-up immunity 200 ma lead temperature (soldering, 10s) 250 c output short circuit duration see note (6) 6. short-circuits from the output to v cc can cause excessive heating. the maximum output current is approximately 80ma, independent of the magnitude of v cc . destructive dissipation can result from simultaneous short-circuits on all amplifiers. table 2. operating conditions symbol parameter value unit v cc supply voltage 2.5 to 6 v v icm common mode input voltage range (1) 1. at 25c, for 2.5 v cc 6v, v icm is extended to v dd - 0.2v, v cc + 0.2v. v dd - 0.2 to v cc + 0.2 v v icm common mode input voltage range (2) 2. in full temperature range, both rails can be reached when v cc does not exceed 5.5v. v dd to v cc v t oper operating free air temperature range -40 to + 125 c
electrical characteristics TSV321-tsv358-tsv324 4/15 3 electrical characteristics table 3. v cc = +3v, v dd = 0v, r l , c l connected to v cc /2, t amb = 25c (unless otherwise specified) symbol parameter conditions min. typ. max. unit v io input offset voltage v icm = v out = v cc /2 TSV321/358/324 TSV321a/358a/324a 0.2 0.1 3 1 mv ? v io input offset voltage drift 2 v/c i io input offset current (1) 1. maximum values including unavoidable inaccuracies of the industrial test. v icm = v out = v cc /2 3 30 na i ib input bias current 1) v icm = v out = v cc /2 4 125 na cmr common mode rejection ratio 0 v icm v cc , v out = v cc /2 60 80 db svr supply voltage rejection ratio 70 85 db a vd large signal voltage gain v out = 0.5v to 2.5v r l = 2k ? r l = 600 ? 80 74 92 95 db v oh high level output voltage v id = 100mv r l = 2k ? r l = 600 ? 2.82 2.80 2.95 2.95 v v ol low level output voltage v id = -100mv r l = 2k ? r l = 600 ? 88 115 120 160 mv i o output source current v id = 100mv, v o = v dd 20 80 ma output sink current v id = -100mv, v o = v cc 20 80 i cc supply current (per amplifier) a vcl = 1, no load 420 650 a gbp gain bandwidth product r l = 10k ? , c l = 100pf, f = 100khz 1 1.3 mhz sr slew rate r l = 10k ? , c l = 100pf, av = 1 0.42 0.6 v/ s m phase margin c l = 100pf 53 degrees en input voltage noise 27 nv/ hz thd total harmonic distortion 0.01 %
TSV321-tsv358-tsv324 electrical characteristics 5/15 table 4. v cc = +5v, v dd = 0v, r l , c l connected to v cc /2, t amb = 25c (unless otherwise specified) symbol parameter conditions min. typ. max. unit v io input offset voltage v icm = v out = v cc /2 TSV321/358/324 TSV321a/358a/324a 0.2 0.1 3 1 mv ? v io input offset voltage drift 2 v/c i io input offset current (1) v icm = v out = v cc /2 3 30 na i ib input bias current 1) v icm = v out = v cc /2 70 130 na cmr common mode rejection ratio 0 v icm v cc , v out = v cc /2 65 85 db svr supply voltage rejection ratio 70 90 db a vd large signal voltage gain v out = 0.5v to 2.5v r l = 2k ? r l = 600 ? 83 77 92 85 db v oh high level output voltage v id = 100mv r l = 2k ? r l = 600 ? 4.80 4.75 4.95 4.90 v v ol low level output voltage v id = -100mv r l = 2k ? r l = 600 ? 88 115 130 188 mv i o output source current v id = 100mv, v o = v dd 20 80 ma output sink current v id = -100mv, v o = v cc 20 80 i cc supply current (per amplifier) a vcl = 1, no load 500 835 a gbp gain bandwidth product r l = 10k ? , c l = 100pf, f = 100khz 1 1.4 mhz sr slew rate r l = 10k ? , c l = 100pf, av = 1 0.42 0.6 v/ s m phase margin c l = 100pf 55 degrees en input voltage noise 27 nv/ hz thd total harmonic distortion 0.01 % 1. maximum values including unavoidable inaccuracies of the industrial test.
electrical characteristics TSV321-tsv358-tsv324 6/15 figure 1. supply current/amplifier vs. supply voltage figure 2. supply current/amplifier vs. temperature figure 3. output power vs. supply voltage figure 4. input offset voltage drift vs. temperature figure 5. input bias current vs. temperature figure 6. open loop gain vs. temperature 02468 supply voltage (v) 0 100 200 300 400 500 600 supply current (a) tamb = 25c 02468 supply voltage (v) 0 100 200 300 400 500 600 supply current (a) tamb = 25c -40-200 20406080100120140 temperature (c) 250 300 350 400 450 500 550 supply current (a) vcc = 5v vcc = 3v -40-200 20406080100120140 temperature (c) 250 300 350 400 450 500 550 supply current (a) vcc = 5v vcc = 3v 123456 supply voltage (v) 0 10 20 30 40 50 60 output power (mw) 10% distortion 1% distortion 0.1% distortion rl = 32 ohms 123456 supply voltage (v) 0 10 20 30 40 50 60 output power (mw) 10% distortion 1% distortion 0.1% distortion rl = 32 ohms -40-20 0 20406080100120140 temperature (c) -150 -100 -50 0 50 100 150 200 input voltage drift (v) vcc = 3v vcc = 5v -40-20 0 20406080100120140 temperature (c) -150 -100 -50 0 50 100 150 200 input voltage drift (v) vcc = 3v vcc = 5v -40 -20 0 20 40 60 80 100 120 140 temperature (c) -40.0 -30.0 -20.0 -10.0 0.0 10.0 input bias current (na) vcc = 3v vicm = 1.5v -40 -20 0 20 40 60 80 100 120 140 temperature (c) -40.0 -30.0 -20.0 -10.0 0.0 10.0 input bias current (na) vcc = 3v vicm = 1.5v -40-200 20406080100120140 temperature (c) 70 80 90 100 110 open loop gain (db) vcc = 5v vicm = 2.5v rl = 600 ohms rl = 2 kohms -40-200 20406080100120140 temperature (c) 70 80 90 100 110 open loop gain (db) vcc = 5v vicm = 2.5v rl = 600 ohms rl = 2 kohms
TSV321-tsv358-tsv324 electrical characteristics 7/15 figure 7. open loop gain vs. temperature figure 8. high level output voltage vs. temperature figure 9. low level output voltage vs. temperature figure 10. output current vs. temperature figure 11. output current vs. temperature figure 12. output current vs. temperature -40-200 20406080100120140 temperature (c) 70 80 90 100 110 open loop gain (db) vcc = 3v vicm = 1.5v rl = 600 ohms rl = 2 kohms -40-200 20406080100120140 temperature (c) 70 80 90 100 110 open loop gain (db) vcc = 3v vicm = 1.5v rl = 600 ohms rl = 2 kohms -40-20 0 20 40 60 80100120140 temperature (c) 40 50 60 70 80 90 100 110 voltage referenced to vcc (mv) vcc = 3v vcc = 5v rl = 600 ohms -40-20 0 20 40 60 80100120140 temperature (c) 40 50 60 70 80 90 100 110 voltage referenced to vcc (mv) vcc = 3v vcc = 5v rl = 600 ohms -40-20 0 20 40 60 80100120140 temperature (c) 40 50 60 70 80 90 100 110 voltage referenced to gnd (mv) vcc = 3v vcc = 5v rl = 600 ohms -40-20 0 20 40 60 80100120140 temperature (c) 40 50 60 70 80 90 100 110 voltage referenced to gnd (mv) vcc = 3v vcc = 5v rl = 600 ohms -40 -20 0 20 40 60 80 100 120 140 temperature (c) -100 -50 0 50 100 output current (ma) isink vcc = 5v vid = 1v isource -40 -20 0 20 40 60 80 100 120 140 temperature (c) -100 -50 0 50 100 output current (ma) isink vcc = 5v vid = 1v isource -40 -20 0 20 40 60 80 100 120 140 temperature (c) -100 -50 0 50 100 output current (ma) isink vcc = 3v vid = 1v isource -40 -20 0 20 40 60 80 100 120 140 temperature (c) -100 -50 0 50 100 output current (ma) isink vcc = 3v vid = 1v isource 0.0 1.0 2.0 3.0 4.0 5.0 output voltage (v) -100 -50 0 50 100 output current (ma) sink vcc = 5v vid = 0.1v vicm = 2.5v source t = 25 c t = -40 c t = 125 c t = 125 c t = -40 c t = 25 c 0.0 1.0 2.0 3.0 4.0 5.0 output voltage (v) -100 -50 0 50 100 output current (ma) sink vcc = 5v vid = 0.1v vicm = 2.5v source t = 25 c t = -40 c t = 125 c t = 125 c t = -40 c t = 25 c
electrical characteristics TSV321-tsv358-tsv324 8/15 figure 13. output current vs. temperature figure 14. gain & phase vs. frequency figure 15. gain & phase vs. frequency figure 16. slew rate vs. temperature figure 17. slew rate vs. temperature figure 18. distortion vs. frequency 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output voltage (v) -100 -50 0 50 100 output current (ma) sink vcc = 3v vid = 0.1v vicm = 1.5v source t = 25 c t = -40 c t = 125 c t = 125 c t = -40 c t = 25 c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 output voltage (v) -100 -50 0 50 100 output current (ma) sink vcc = 3v vid = 0.1v vicm = 1.5v source t = 25 c t = -40 c t = 125 c t = 125 c t = -40 c t = 25 c 1e+3 1e+4 1e+5 1e+6 frequency (hz) 0 10 20 30 40 50 60 70 gain (db) 40 60 80 100 120 140 160 180 phase () rl = 10k cl = 100 pf vcc = 5v gain phase 1e+3 1e+4 1e+5 1e+6 frequency (hz) 0 10 20 30 40 50 60 70 gain (db) 40 60 80 100 120 140 160 180 phase () rl = 10k cl = 100 pf vcc = 5v gain phase 1e+3 1e+4 1e+5 1e+6 frequency (hz) 0 10 20 30 40 50 60 70 gain (db) 40 60 80 100 120 140 160 180 phase () rl = 10k cl = 100 pf vcc = 3v gain phase 1e+3 1e+4 1e+5 1e+6 frequency (hz) 0 10 20 30 40 50 60 70 gain (db) 40 60 80 100 120 140 160 180 phase () rl = 10k cl = 100 pf vcc = 3v gain phase -40-200 20406080100120140 temperature (c) 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 slew rate (v/s) positive slew rate vcc = 5v gain = +1 vin = 2 to 3v rl = 10kohms cl = 100 pf negative slew rate -40-200 20406080100120140 temperature (c) 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 slew rate (v/s) positive slew rate vcc = 5v gain = +1 vin = 2 to 3v rl = 10kohms cl = 100 pf negative slew rate -40-200 20406080100120140 temperature (c) 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 slew rate (v/s) positive slew rate vcc = 3v gain = +1 vin = 1 to 2v rl = 10kohm cl = 100 pf negative slew rate -40-200 20406080100120140 temperature (c) 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 slew rate (v/s) positive slew rate vcc = 3v gain = +1 vin = 1 to 2v rl = 10kohm cl = 100 pf negative slew rate 1e+1 1e+2 1e+3 1e+4 1e+5 frequency (hz) 0.000 0.025 0.050 0.075 0.100 0.125 0.150 vcc = 3v vout = 1vpp rl = 32 ohms gain = -1 distortion (%) 1e+1 1e+2 1e+3 1e+4 1e+5 frequency (hz) 0.000 0.025 0.050 0.075 0.100 0.125 0.150 vcc = 3v vout = 1vpp rl = 32 ohms gain = -1 distortion (%)
TSV321-tsv358-tsv324 package mechanical data 9/15 4 package mechanical data in order to meet environmental requirements, st offers these devices in ecopack ? packages. these packages have a lead-free second level interconnect. the category of second level interconnect is marked on the package and on the inner box label, in compliance with jedec standard jesd97. the maximum ratings related to soldering conditions are also marked on the inner box label. ecopack is an st trademark. ecopack specifications are available at: www.st.com . 4.1 so-8 package dim. mm. inch min. typ max. min. typ. max. a 1.35 1.75 0.053 0.069 a1 0.10 0.25 0.04 0.010 a2 1.10 1.65 0.043 0.065 b 0.33 0.51 0.013 0.020 c 0.19 0.25 0.007 0.010 d 4.80 5.00 0.189 0.197 e 3.80 4.00 0.150 0.157 e 1.27 0.050 h 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.020 l 0.40 1.27 0.016 0.050 k ? (max.) ddd 0.1 0.04 so-8 mechanical data 0016023/c 8
package mechanical data TSV321-tsv358-tsv324 10/15 4.2 tssop8 package dim. mm. inch min. typ max. min. typ. max. a 1.2 0.047 a1 0.05 0.15 0.002 0.006 a2 0.80 1.00 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.008 d 2.90 3.00 3.10 0.114 0.118 0.122 e 6.20 6.40 6.60 0.244 0.252 0.260 e1 4.30 4.40 4.50 0.169 0.173 0.177 e 0.65 0.0256 k0? 8?0? 8? l 0.45 0.60 0.75 0.018 0.024 0.030 l1 1 0.039 tssop8 mechanical data 0079397/d
TSV321-tsv358-tsv324 package mechanical data 11/15 4.3 miniso-8 package
package mechanical data TSV321-tsv358-tsv324 12/15 4.4 so-14 package dim. mm. inch min. typ max. min. typ. max. a 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 c 0.5 0.019 c1 45? (typ.) d 8.55 8.75 0.336 0.344 e 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 f 3.8 4.0 0.149 0.157 g 4.6 5.3 0.181 0.208 l 0.5 1.27 0.019 0.050 m 0.68 0.026 s? (max.) so-14 mechanical data po13g 8
TSV321-tsv358-tsv324 package mechanical data 13/15 4.5 tssop14 package dim. mm. inch min. typ max. min. typ. max. a 1.2 0.047 a1 0.05 0.15 0.002 0.004 0.006 a2 0.8 1 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 d 4.9 5 5.1 0.193 0.197 0.201 e 6.2 6.4 6.6 0.244 0.252 0.260 e1 4.3 4.4 4.48 0.169 0.173 0.176 e 0.65 bsc 0.0256 bsc k0? 8?0? 8? l 0.45 0.60 0.75 0.018 0.024 0.030 tssop14 mechanical data c e b a2 a e1 d 1 pin 1 identification a1 l k e 0080337d
package mechanical data TSV321-tsv358-tsv324 14/15 4.6 sot23-5 package dim. mm. mils min. typ max. min. typ. max. a 0.90 1.45 35.4 57.1 a1 0.00 0.15 0.0 5.9 a2 0.90 1.30 35.4 51.2 b 0.35 0.50 13.7 19.7 c 0.09 0.20 3.5 7.8 d 2.80 3.00 110.2 118.1 e 2.60 3.00 102.3 118.1 e1 1.50 1.75 59.0 68.8 e.95 37.4 e1 1.9 74.8 l 0.35 0.55 13.7 21.6 sot23-5l mechanical data 0
TSV321-tsv358-tsv324 revision history 15/15 5 revision history information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this p ublication are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectron ics products are not authorized for use as critical components in life support devices or systems without express written approval of stmicr oelectronics. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners ? 7 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com table 5. document revision history date revision changes aug. 2005 1 ? first release - products in full production sept. 2005 2 ? addition of ts321a/ts324a/ts358a data in tables in chapter 3: electrical characteristics on page 4 . ? minor formatting and grammatical changes. dec. 2005 3 ? missing ppap references inserted see table 1: order codes on page 2 .

▲Up To Search▲

Price & Availability of TSV321

	To Download TSV321 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .